19寸五线屏参数;
外形尺寸：382*324mm
可视区： 381*305.5mm
驱动区： 376*300.5mm
引出线长度：67±0.50mm
|
Dimensional Outline
|
382(L) ×324 (W)
|
mm
|
|
Viewing Area
|
381(L) ×305.5 (W)
|
mm
|
|
Active Area
|
376(L) × 300.5(W)
|
mm
|
17寸五线屏参数;
外形尺寸：355*287mm
可视区： 338*272.5mm
驱动区： 332*266.5mm
引出线长度：60±0.50mm
|
Dimensional Outline
|
355(L) ×287 (W)
|
mm
|
|
Viewing Area
|
338(L) ×272.5 (W)
|
mm
|
|
Active Area
|
332(L) × 266.5(W)
|
mm
|
15寸五线屏
外形尺寸：305*250mm
台北禾瑞亚五线USB触摸屏控制器
尊敬的客户：
首先，我们衷心感谢贵公司的信任和支持。我公司生产的电阻式触摸屏严格按照ITO TOUCH PANEL标准规范制作,经检验其性能均满足贵司的要求。
15/17/19英寸五线电阻式触摸屏是我司针对目前市面上工控平板电脑及POS机常用尺寸而开发的一款产品。屏体的四边较宽，装机时贴合在液晶模块四边最为牢固。使用时可直接搭配种类工控（民用）触摸屏控制器使用，具有一次定位较正永不漂移，定位线性精确度在1.5%.具有定位准确、反应灵敏、使用时光标不抖动等特点。该产品广泛运用于工控设备,大型医疗设备,办公自动化设备,POS收银机,彩票机等公用民用领域.以下是该款五线屏的外观尺寸机中英文产品规格.
ITO TOUCH PANEL标准规范
产品结构： 上线film + 下线glass +双面胶 +引出线FPC
连接器类型：FPC+母pin+HOUSING
产品总厚度: 2.30±0.15mm
电子特性： 电路等级：5V(DC),1mA
透明度：薄膜与玻璃型—550nm 68%
绝缘阻抗: 类比式—25V（DC）≥10 MΩ
触点抖动时间：≤30ms
使用寿命：≥1000万次（采用硅胶做测试头）
笔 划寿命：>200万次
机械特性： 操作压力: 50-150g
线 性：<1.0%
表面硬度： 4H
环境参数： 操作温度：-10℃- +60℃
储存温度：-20℃- +70℃
恒温恒湿：40℃,90%/RH,96小时
1. Features
Type : Analog Resistive Type Touch Panel
Input Mode : Pen or Finger
Structure : PET ---------Antiglare hard coating ITO Film,188μm
Glass ---------2.0mm
Spacer-------- 0.1mm
Dot Pitch---- 2.5mm×2.5mm
Connector : Mylar
2. General Specification
|
PET(ITO Film)
|
188±15
|
μm
|
|
Connector
|
FPC, 4-Pin Housing
|
|
3. Rating
3.1 The maximum voltage
5 V (DC) ﹑1mA
3.2 Usable Temperature Range
From -10℃ to +60℃
3.3 Storage Temperature Range
From -20℃ to +70℃
4. Electrical Specification
＊ Resistance between leads : 300Ω<FILM(Y axis) <700Ω
200Ω<FILM(X axis)<500Ω
＊ Linearity : X axis : ±1.5% ↓
Y axis : ±1.5% ↓
＊ Insulation resistance : 25V(DC) ﹑10MΩ↑
4.1 Insulation resistance
25V(DC) ﹑10MΩ↑
4.2 Chattering Time
30msec ↓
5. Mechanical Specification
5.1 Input Method
Pen or Finger
5.2 Operating Force
40g↓With R3.0 Rubber
5.3 Surface Hardness
4H(Pencil Test)
Hard Coated PET
5.4 Light Transmission
80% at 550nm wavelength
6. Durability
6.1 Durability against writing Characters
After writing 100,000 characters in the same area
(20mm×20mm), Force: 250g , Speed: 1,000 characters/hour
＊ Resistance between leads : 300Ω<FILM(Y axis) <800Ω
200Ω<FILM(X axis)<600Ω
＊ Linearity : X axis : ±1.5% ↓
Y axis : ±1.5% ↓
＊ Insulation resistance : 25V(DC) ﹑10MΩ↑
6.2 Punching Life
After Punching 1,000,000 Times with the R3.0 silicon rubber
Force : 250g, Speed : 2/sec
＊ Resistance between leads : 300Ω<FILM(Y axis) <800Ω
300Ω<FILM(X axis)<600Ω
＊ Linearity : X axis : ±1.5% ↓
Y axis : ±1.5% ↓
＊ Insulation resistance : 25V(DC) ﹑10MΩ↑
6.3 Impact Resistance
No damage when ɸ9mm steel ball is dropped on the surface from 30cm height at 1 time.
6.4 ITO connector insert/pull out Resistance
5 times at least.
The requirements in 4.1 shall be satisfied.
6.5 Vibration Resistance
<In operation>
No faulty operation when sweep vibration of 0.2G 10~55Hz
(1min.) is given for 30min. each in the directions of X, Y, Z.
<Not in operation>
The requirements in 5.2 and 4.1~4.4 shall be satisfied after sweep vibration of 2.0G 10~55Hz (1min.) is given for 30min each in the directions of X , Y , Z.
6.6 Package Drop
No damage to the product
7. Reliability
7.1 High Temperature Test
After putting panels at 60℃ for 120 hours,
Then leaving for 24 hours at room temperature
＊ Resistance between leads : 300Ω<FILM(Y axis) <800Ω
200Ω<FILM(X axis)<60Ω
＊ Linearity : X axis : ±1.5% ↓
Y axis : ±1.5% ↓
＊ Insulation resistance : 25V(DC) ﹑10MΩ↑
＊ Operating Force : 40g↓With R3.0 Rubber
7.2 Low Temperature Test
After putting panels at -20℃ for 120 hours ,then leaving for 24 hours at room temperature.
＊ Resistance between leads : 300Ω<FILM(Y axis) <800Ω
200Ω<FILM(X axis)<600Ω
＊ Linearity : X axis : ±1.0% ↓
Y axis : ±1.0% ↓
＊ Insulation resistance : 25V(DC) ﹑10MΩ↑
＊ Operating Force : 40g↓With R3.0 Rubber
7.3 Temperature and Humidity Test
After putting panels at 60℃, 90%RH for 120 hours,
Then leaving for 24 hours at room temperature.
＊ Resistance between leads : 300Ω<FILM(Y axis) <800Ω
200Ω<FILM(X axis)<600Ω
＊ Linearity : X axis : ±1.5% ↓
Y axis : ±1.5% ↓
＊ Insulation resistan1ce : 25V(DC) ﹑10MΩ↑
＊ Operating Force : 40g↓With R3.0 Rubber
可视区： 308*235mm
驱动区： 302*228mm
|
Dimensional Outline
|
325(L) ×250 (W)
|
mm
|
|
Viewing Area
|
308(L) ×235 (W)
|
mm
|
|
Active Area
|
302(L) × 228(W)
|
mm
|
